Epoxy Flooring in Holton, KS

Holton homeowners usually call about epoxy flooring for the garage, and the calendar has a lot to do with how that floor wears. Holton's climate table shows May and June as the wettest months, with 4.98 and 4.88 inches of rain on average. January is the driest at 0.79 inches. The record high of 110°F was reached in both July and August, and the record low is -23°F. A garage floor here sees mud in late spring, hot tires in summer and frozen slush in winter.

Spring: mud and wet tires

The weeks of heavy rain bring mud in on tires and boots. On bare concrete, that mud dries into the surface and stains it. A sealed coating keeps it on top, where a hose and a squeegee clear it. A broadcast flake floor also hides the light film of dust that comes back between washes.

Summer: heat and hot tires

Hot tires can soften and lift a thin coating, a problem called hot tire pickup. It shows up as peeled patches in the tire paths. We prevent it with a ground slab and a full-thickness system rather than a single thin coat. If you park right after a long drive in July, that bond is what keeps the floor intact.

Winter: slush on a cold slab

A coated floor sheds meltwater and de-icer instead of soaking it up. For winter installs we check the slab temperature first. A polyaspartic topcoat cures in a wider temperature range than standard epoxy, which helps in an attached garage during cold months.

When to book

We suggest early spring or early fall for a Holton garage. Those seasons have milder temperatures for curing, and the floor is finished before the wet weeks of May and June or before the first snow.

Floors around the square

Holton has been the Jackson County seat since 1858, and the present courthouse was completed in 1921. It had 3,401 residents in 2020, and its downtown still draws people from across the county. Offices, shops and service buildings that see steady foot traffic can use a commercial coating. For work areas with carts or vehicles, we use a thicker 100% solids epoxy. We work around your business hours and write out the cure plan in advance.

Choosing between flake and solid color

Solid color epoxy gives a clean, even look and costs a little less. It also shows every speck of dust and every tire mark. Flake hides those things and adds grip, which is why we suggest it for most Holton garages. For a shop or business floor, a solid light gray with a textured topcoat is often the most practical choice.

Cleaning through the seasons

A coated floor needs little care, but a few habits help. In spring, hose off dried mud before it builds up. In summer, sweep out grit that can scratch under tires. In winter, push slush out the door with a squeegee and rinse the salt film off once the weather warms. A mild cleaner is enough. Avoid harsh acids on any coated floor.

Homes for every stage

Holton had 1,599 housing units in 2020, and 21.7% of residents were 65 or older. For older homeowners, we suggest a textured flake floor for grip at the door into the house. Call (785) 508-1522 or

Get a Free Estimate

to set up a visit.