Metallic Epoxy Floors in Topeka, KS

Metallic epoxy floors get their look from fine mica-like pigment stirred into clear resin. While the resin is still wet, we push it around with rollers, trowels and sometimes a sprayer. The pigment follows those movements and settles into veins, clouds and ripples that can read as marble, slate or water under ice. In Topeka the usual places for a metallic epoxy floor are a basement rec room, a home bar, a garage that holds a weekend car, and small businesses like salons and boutiques.

Is this the 3D floor from the videos?

People in Topeka search for 3D epoxy floors often enough that it comes up on the first page of results. Those are real. A 3D floor is a printed image, like a beach or a canyon, laid on the slab and buried under thick clear resin. A metallic floor has no print. Its depth comes from the pigment and the way it was worked. If you want a scene, you want 3D. If you want something that looks like stone, you want metallic.

The base color decides a lot

Under the metallic layer sits a solid base coat, and its color shows through every thin spot. A black base under silver gives strong contrast and a stormy look. A gray base under the same silver reads softer. We bring a few pigment cards and talk through the base and the metallic together, with the room's lighting in mind. Most floors use one to three metallic colors.

Where it fits in a Topeka house

Topeka's median home was built in 1967, according to American Community Survey figures summarized by Point2Homes. A lot of those houses have a basement that was finished once, decades ago, and now has worn carpet or painted concrete. A metallic floor turns that room into a bar or a media room without adding height to the floor. It also suits a garage where a car mostly sits. For the garage that takes a daily driver through a winter of beet juice and brine, a flake floor is easier to live with.

Damp clay shows through gloss

Most of eastern Shawnee County sits on clay till, per the Kansas Geological Survey's geologic map, and clay stays wet after spring rain. If vapor pushes up under a glossy metallic layer, it shows up as cloudy patches or blisters right in the middle of the room. We test basement slabs before we plan the pour, and we use a moisture-tolerant primer when the readings call for one. A slab that lets in liquid water gets fixed first.

Sun through an open door

Epoxy can turn amber in sunlight. Basements rarely see enough of it to matter. A garage with a west-facing door in July, or a storefront with big glass, is different. Topeka sees about 50 days a year at 90°F or above, and long summer afternoons. We finish those floors with a UV-stable clear coat, often polyaspartic, which also takes the scuffs so the color layer stays untouched.

Smooth means slick when wet

A metallic floor is glassy. Spilled drinks, wet shoes and melting snow make it slippery. A fine anti-slip grit can go into the clear coat in walkways and by doors. It dulls the shine a little, so many owners put it only where people step in from outside.

Living with it

A dark, glossy floor shows dust and footprints sooner than a speckled one. A dust mop handles most of it. Wash with a mild cleaner, use felt pads on chairs and stools, and put a mat at each outside door.