Epoxy Flooring in Rossville, KS

Epoxy flooring in Rossville usually means a garage or basement poured during the town's biggest building years. Census counts on Wikipedia show Rossville at 577 people in 1950, 797 in 1960, 934 in 1970 and 1,045 in 1980. That is roughly 470 new residents in thirty years in a town of about half a square mile. Many of the slabs we see here date from that stretch. They have held up, but forty to seventy years of cars, freezers, lawn tractors and paint cans leave marks.

What those older slabs usually show us

• Oil and transmission fluid soaked in where a car sat for decades
• One or two coats of old floor paint, often peeling at the tire paths
• Control joints and hairline cracks that have widened and collected grit
• A sloped apron at the door that has settled away from the main slab
• A dusty top layer that sheds every time it is swept

Each of these changes the prep. Paint and old sealer have to come off. Oil has to be ground out or treated. Cracks get opened and filled so they stay level under the new coat. We note all of it on the written quote so you can see where the labor goes.

A family town with full garages

Rossville had 413 households at the 2010 census, and 30.1% of residents were under 18. A garage in a house with kids tends to be storage, workshop and mudroom at the same time. Bikes, sports gear and a second fridge share space with the car. For that kind of room we usually suggest a flake floor. The color chips hide scuffs and dried mud, and the texture gives some grip when boots come in wet. A clear polyaspartic topcoat over the flake is easy to sweep and mop.

Basements on the Kaw Valley floor

Rossville is a Kaw Valley town, and its school district, Kaw Valley USD 321, carries the valley's name. Low river-valley ground can stay wet after a rainy spring. Before we coat any Rossville basement we run a moisture test on the slab. If vapor coming up through the concrete is within the range the product can handle, a basement floor epoxy turns a damp-looking floor into a bright, washable surface for laundry, storage or a home gym. If moisture is high, we tell you before quoting, and we talk through a moisture-tolerant primer or other options.

Which system fits which Rossville floor

• Garage Floor Coating: the full ground-and-coated system for a one- or two-car attached garage
• Epoxy Flake Floors: the most common choice for busy family garages
• Polyaspartic Floor Coating: when you need the garage back fast, often the next day
• Basement Floor Epoxy: for slabs that pass a moisture test
• Metallic Epoxy Floors: for a finished basement rec room or bar area
• Commercial & Shop Floor Epoxy: for detached shops and outbuildings on the edges of town

Timing an install around a busy household

Most Rossville garage jobs take one to two days on site. Day one is grinding, crack repair and the base coat. Day two is flake and topcoat, or the whole system in one day if we use polyaspartic. Plan to park in the driveway for the cure time we give you, and keep pets and kids off the floor until the walk-on time. We vacuum dust as we grind, so the house stays clean.

Getting an estimate

We come out, measure, test moisture and look for paint, oil and cracks. The written quote lists the system, each coat and the prep, with one total price. Call (785) 508-1522 or

Get a Free Estimate

to set a time.